SMARTNODE DISCOVERY TOOL HOW TO
SMARTNODE DISCOVERY TOOL ZIP FILE
SMARTNODE DISCOVERY TOOL UPDATE
SMARTNODE DISCOVERY TOOL UPGRADE
SMARTNODE DISCOVERY TOOL PASSWORD

New networks will offer higher transmissions speeds, more bandwidth, and less latency.

Define the вЂњFax ExtensionвЂќ, the вЂњFax Extension Authentication IDвЂќ and the вЂњFax Extension Authentication PasswordвЂќ.Smartnode discovery tool, smartnode discovery tool download, smartnode discovery tool v1.07.

In case you are using fax machines connected to your FXS gateway, вЂњFax ExtensionsвЂќ must be used instead of using a regular extension. The mapped extension will now be visible in the вЂњPhonesвЂќ tab (except fax extensions, which will be shown in the вЂњSystem ExtensionвЂќ tab).

In order for the configuration to be applied, reload the device.

Upload the configuration file onto the Patton device by using the вЂњChoose FileвЂќ and вЂњImportвЂќ button.

whereby the gateways IP address is 192.168.9.163).

N avigate to the вЂњImport ConfigurationвЂќ page (e.g.

SMARTNODE DISCOVERY TOOL PASSWORD

Open your web browser and connect to your Patton FXS device.

A file will be downloaded to your PC which will be used in a few moments. Reopen the just created FXS device and click on the вЂњProvisioning URLвЂќ.

SMARTNODE DISCOVERY TOOL HOW TO

Note : If you plan on using fax machines on the FXS gateway, please create dedicated fax extensions in the вЂњFax ExtensionвЂќ menu (Refer to step 5 for information on how to do this).

Finalize the configuration by saving the config with вЂњOKвЂќ. In the example above, port 1 on the FXS Gateway will be mapped to extension 001, port 2 will be mapped to extension 002 and so on. Navigate to вЂњExtensionвЂќ tab in the вЂњFXS/DectвЂќ device to assign which extensions should be used from the device.ДЇollow the above image in order to define which extensions will be using each port on the FXS gateway. If the country is not listed, request from your telco the used tone set of your line.

Tone Set : Define in which country you are using this device.

In T.38 mode the Patton FXS device will actively switch to the T.38 protocol once the call is established. However if you are running a VoIP Provider which does not support the T.38 protocol, select вЂњFax in AudioвЂќ. In case your VoIP provider supports T38 or you have a Patton FXO or ISDN configured for T38 then set the codec to T38.

FAX Transmission Mode : In this section select how the Patton gateway should handle fax connections.

(if network topologies require routing information such as default routes, see here how to add the default route to a Patton device).

Subnet Mask : Enter your Network Mask size (e.g.

(the IP address will be set to static in case DHCP is being used)

Gateway IP address: Enter your Patton FXS deviceвЂ™s IP address.

Note: If you select the 3CX SBC, enter the Static LAN IP Address of the SBC that is configured on the remote network.

Provisioning Method: Select вЂњLocal LAN or вЂњ3CX SBCвЂќ depending on your setup.

You need to define the device and line specific options:

MAC Address: Enter the FXS deviceвЂ™s MAC address (underneath the device).

Select model/device: Patton 2 Ports FXS GW or Patton 4 Ports FXS GW.

Navigate to вЂњFXS/DECTвЂќ within the 3CX Management Console and select вЂњAdd FXS/DECTвЂќ:

SMARTNODE DISCOVERY TOOL UPDATE

Do not turn off the power until the update is complete.

SMARTNODE DISCOVERY TOOL UPGRADE

It takes some minutes for the firmware upgrade to complete.After you have successfully uploaded and extracted the firmware press вЂњReloadвЂќ to start applying the upgrade.

SMARTNODE DISCOVERY TOOL ZIP FILE

zip file downloaded and then press вЂњ Import вЂќ. Navigate to вЂњImport/ExportвЂќ в†’ вЂњImport FirmwareвЂќ в†’ and in вЂњ Download Firmware вЂќ choose your firmware.Login to your account (Default username: administrator, password: leave empty ).Open your web-browser to your FXS gateway IP address retrieved in the previous step.Trinity Firmware/Devices are currently NOT supported. Note : All templates are designed to work with Patton SmartWare firmware and the device should run on the вЂњlatest 6.X firmwareвЂќ. Once the device is detected, d ownload and upgrade the firmware of your Patton FXS gateway. In order to identify your FXS gateway IP address follow our guide вЂњ How to Use the Patton Discovery Tool вЂќ. If you are looking for another technology:

Trinity Firmware is NOT supported for these devices.

Those extensions can be addressed as normal phones however their functionality is limited due to the capabilities of the analog technology. Supported Models: Patton SmartNode SN4112 and SN4114ДЇXS gateways connect internal analog devices such as fax machines and phones, and register them as extensions / fax extensions to your 3CX.

Supported Models: Patton SmartNode SN4112 and SN4114.